Other information about the product
Pinion sprockets double friction rollers for heavy loads
FDN series – double friction
FDR series – adjustable double friction
FDN series rollers are completely metallic, double friction rollers used for the temporary accumulation of units, also in case of resistance to motion. In fact with the only radial friction they can win deformations of the contact surfaces and the units sticking, even if not centrally loaded, slight slopes or side rubbing.
FDR series rollers have similar features but, beside the dragging radial friction force in proportion to the weight of the load, they have an adjustable pre-loading system of the axial friction.
The axial friction can supply an additional force to be foreseen for particularly critical situations, with marked irregularities and resistances. However, we suggest not abusing of the adjusting and choosing the minimum necessary one to grant the running by avoiding problems of higher compression between the conveyed units, exceeding overloads to transmission or yielding of the stop devices.
For your correct selection we suggest contacting Rulli Rulmeca.
The use of these rollers is allowed for peripheral speeds up to 0,5÷0,6 m/s and for application temperatures from -20°C to +60°C, to be verified for maximum loads.
Idle rollers for medium and heavy weight conveyor systems in internal, external, normal, dusty and humid environments.
Pinion sprocket friction rollers P1C-P2C for light and medium loads: Polyamide or steel pinion sprockets, steel or PVC tube.
Steel driven tapered rollers P2C