Guide Rollers for Conveyor

Rulmeca designs and manufactures guide rollers for conveyors to limit the possible side-slip of the belt and keep its alignment.

Guide Rollers for Conveyor

  • VERY SOLID HIGH WALL THICKNESS, RESISTANT TO BELT EDGE WEAR
  • TOP CLOSED TIGHT SHELL + SMOOTH ROTATION DUE TO CONTACLESS SEALS
  • STANDARD + ALL REQUESTED EXECUTIONS (EX, FOR PIPE CONV.)

Other information about the product

For various reasons, the conveyor belt may tend to drift laterally at times. In these cases, to limit the problem, it’s possible to use vertical rollers with cantilevered spindles, generally known as belt guide rollers. These special rollers for conveyors allow a continuous and immediate alignment of the belt, despite the stress to be beard due to the transportation of heavy loads.

There are multiple advantages associated with the installation of guide rollers for conveyors and the provided alignment of the belt. Their use allows a more efficient, long-lasting and safer functioning of the conveyor system. To keep the belt in the right running helps to avoid slips and fall risks of the conveyed materials for operators during functioning and reduce the waste of resources. Of course, this also cut downtimes and unplanned maintenance interventions of the belt. As last consequent advantage, the use of guide rollers for conveyor may clearly increase productions and profits of the industry in question.

However, it’s necessary to pay particular attention to the use of such rollers for conveyors, so that the forces on the guide roller by the belt do not damage the belt edge. In other words, guide rollers do not eliminate the true reason for the belt tracking off; therefore, the belt may consequently ride over the guide roller or become distorted against it. For these reasons, it’s advisable to always use guide rollers on the so called self-centralizing transoms which rotate automatically whenever the belt tracks off conveyor center and self-corrects.

Related applications
Related products

Belt tracking roller

The belt tracking roller responds instantly to the misalignment of the belt

Self-centering sets

The self-centering troughing sets are used for correcting the belt tracking and maintain it constantly in central position.

Return sets

Sets used for sustaining the empty belt in the return section.

Upper carrying troughing set

Troughing sets used for sustaining the belt on the loaded section and the section where it is loaded with material.

Cadenas

Cadenas | Bulk

Download our standard Bulk catalog drawings in the main 2D and 3D formats in CADENAS

Enter

Subscribe to our newsletter

Sign up for our newsletter and you will always be up to date with the latest news.

Subscribe