Our material handling components for recycling conveyor systems

Medium and heavy-duty motorized pulleys meant for applications with regular and constant operating conditions.

Motorized Pulley diameter 500 mm - Length min. RL 600 mm and power between 2.2 and 30.0 kW. Meant for applications where the belt requires a larger pu (...)

Motorized Pulley diameter 138 mm - Length min. RL 300 mm and power between 0.10 and 1.0 kW.

Rulmeca scrapers with blades in Polyurethane

RULMECA solution for low noise according to the Directive RL 2000/14/EC

Rollers used in the movement of small or light loads even in medium severe environmental conditions.

Return rollers employed to reduce the deposit of material by operating on the surface of the dirty side of the belt in order to support the belt when (...)

These return rollers contribute to eliminating the build-up of material which particularly is present in the belt centre.

Impact rollers consist of the basic steel PSV rollers design, on which are fitted rings, designed to resist and absorb the pressure given by the impac (...)

Rulmeca designs and manufactures guide rollers for conveyors to limit the possible side-slip of the belt and keep its alignment.

HDPE rollers for light to medium duty applications: a light, strong and eco-friendly solution.

The belt tracking roller responds instantly to the misalignment of the belt

Drive pulleys ATN-ATS - Idler pulleys UTN-UTS-UTI

The covers are used to protect the conveyed materials and to avoid the dispersion of powders.

Garland suspended sets used in applications like mining for the conveying of large lump size material.

Stations designed for the use on light or medium load capacity belt conveyors with small lump size material.

The self-centering troughing sets are used for correcting the belt tracking and maintain it constantly in central position.

Sets used for sustaining the empty belt in the return section.

Troughing sets used for sustaining the belt on the loaded section and the section where it is loaded with material.

Support brackets in cold pressed sheet steel.

Light duty economical rollers.

Anti-corrosion rollers - series PL for belt conveyors handling corrosive materials. Shaft diameter: 20 mm - PVC or steel tube with diameter from 89 to (...)