MPS/K1 和 MPS/N1 型提供带单或双冠链轮（直接焊接到筒体上）的钢制驱动托辊。
与链轮版本相比，外径的增加可通过利用有利的传动比来减小同一应用中所用链条的尺寸，从而得到补偿。
本系列设计用于-20°C至+100°C的室温环境。在验证使用条件后，可承受更低的最低温度。
最大允许速度取决于施加在每个托辊上的载荷。

材料

筒体: 钢（未加工或镀锌），不锈钢。
端盖: 钢（未加工或镀锌），不锈钢，6202系列刚性径向球轴承，塑料。
轴: 钢（未加工或镀锌），不锈钢。
可根据要求提供其他表面处理。

制造、包装和自动化

能够保证系统高性能和全面功能的输送机物料搬运组件。

食品和鱼类加工

经过研究和制造的物料搬运组件，可确保易于清洁并符合卫生法规。

饮料加工

确保快速、流畅和精确运输的物料搬运组件。

Catalog Unit Handling Roller (EN|IT)

可选

Flanges

For the rollers diameter 76 and 89 mm, aluminium flanges are supplied separately in a special kit, composed by 2 elements and complete with zinc plated fixing bolts to assemble them in different ways. Attention: the screws must be tightened by torque wrench = 13 Nm

可选

PVC covered rollers

Although not special, information on this design is given. The rough or zinc plated steel tube “N” or “Z and J” rollers with “D” values as per table, can be covered with a soft, elastic and smooth surface (hardness 73 ShA) grey colour (RAL 9006) PVC (Polyvinylchloride) plastic tube, particularly resistant to chemical agents. It is normally used to protect the roller surfaces and mostly to avoid scratching painted, enamelled, smooth, etc. load, and in some cases to increase friction. The PVC lagging is simply fitted on the tube with excellent coupling thanks to elastic tightening. Application temperatures ranging from -10°C to +50°C.

可选

Rollers with Polyurethane lagging

Polyurethane lagging with 90 ± 5 Sh.A hardness, orange colour, a material which is particularly resistant to cuts, wear and abrasion. Hardness, colour and thickness can be supplied with other values on request.

可选

Rollers with rubber lagging

Lagging with 70 ± 5 Sh.A hardness, with surface turned to 3 mm minimum thickness. On request the lagging can be with different hardnesses or thicknesses or with glued rubber, Adiprene, Neoprene and Silicone compatibily with the number of rollers requested.