Self-centralising troughing sets

The self-centralising troughing sets are used for correcting the belt tracking and maintain it constantly in central position.

Self-centralising troughing sets

  • 高效而强大的自对齐与故障诊断和返回套件
  • 由于使用了带满球滚珠配件的硬化滚道轴承,寿命长,功能可靠
  • 使用标准承载或返回托辊(无橡胶圈)

有关产品的其他信息

Sometimes the difficult working conditions of the plant results in a lateral movement of the belt. In this case a self-centralising troughing set is used which acts in a way that corrects the belt tracking and maintains it constantly in the central position.
The self-centralising troughing set is designed as a series of rollers arranged in a trough positioned onto the supporting transom which itself is fixed to a slewing ring which permits rotation.
The slewing ring (a large ball bearing) permits a rotation limited to 5-8 degrees and is sized in proportion to the vertical loading; a tapered roller bearing assembled to the shaft of the slewing ring, absorbs any side forces or overturning pressures.
The installation of the self-centralising troughing sets is advised to be positioned on the upper strand rather than the return section, and used only when the working conditions require.

相关应用
病历

Tormets Oy (Finland)

Tormets Oy (Finland)

阅读更多
相关产品

导向托辊

导向托辊

皮带调偏辊

皮带调偏辊在皮带跑偏后立即做出响应

输送带清扫器

清扫设备用于确保工厂保持一般效率并减少维护所需的检修时间。

Return sets

Sets used for sustaining the empty belt in the return section.

Cadenas Part Solutions

准备好链接解决方案

依目录下载我们的标准散物料产品2D及3D格式的图纸,已准备好此类图链接;

进入

订阅我们的通讯

报名参加我们的时事通讯,你就能随时了解最新的新闻。

订阅