BULK HANDLINGUNIT HANDLING

Return rollers with helical rubber rings

Return rollers employed to reduce the deposit of material by operating on the surface of the dirty side of the belt in order to support the belt when the material being conveyed is very viscous.

MPS1 108NM.pdf [pdf]DOWNLOAD
MPS1 133NM.pdf [pdf]DOWNLOAD
PSV1-FHD 108NM.pdf [pdf]DOWNLOAD
PSV1-FHD 133NM.pdf [pdf]DOWNLOAD
PSV1-FHD 180NM.pdf [pdf]DOWNLOAD
PSV2-FHD 133NM.pdf [pdf]DOWNLOAD
PSV2-FHD 180NM.pdf [pdf]DOWNLOAD
PSV3-FHD 133NM.pdf [pdf]DOWNLOAD
PSV3-FHD 180NM.pdf [pdf]DOWNLOAD
PSV4-FHD 133NM.pdf [pdf]DOWNLOAD
PSV4-FHD 180NM.pdf [pdf]DOWNLOAD
Self-cleaning NM.pdf [pdf]DOWNLOAD

MORE INFO

Used on the return transom to support the belt when the material being conveyed, even if only a little sticky, is very viscous.
The helical spiral form of the non-abrasive rings, assembled onto the base roller shell, performs a cleaning action and reduces the tendency of material to deposit itself and stick to the surface of the dirty side of the belt.
They may be employed on any part of the return belt section in the case of short conveyors.
On long sections it is satisfactory to employ these rollers only up to the point where the material does not adhere any more to the belt surface.
These rollers should not be employed as snub rollers adjacent to the drive or return drums.