Return rollers with helical steel cage

Return rollers employed to reduce the deposit of material by operating on the surface of the dirty side of the belt in order to support the belt when the material being conveyed is very viscous.

MPS1 60NS.pdf [pdf]DOWNLOAD
MPS1 76NS.pdf [pdf]DOWNLOAD
PSV91-FHD 108S.pdf [pdf]DOWNLOAD
PSV91-FHD 133S.pdf [pdf]DOWNLOAD
PSV92-FHD 133S.pdf [pdf]DOWNLOAD
PSV94-FHD 133S.pdf [pdf]DOWNLOAD
RTL1 60NS.pdf [pdf]DOWNLOAD
RTL1 76NS.pdf [pdf]DOWNLOAD
Self-cleaning S-NS.pdf [pdf]DOWNLOAD


Used in the return section to support the belt when the conveyed material is very adhesive, as with for example clay.
They may be positioned on any part of the conveyor return section, when it is relatively short.
When these rollers are produced with a spiral steel cage, it is attached to the two end caps with similar characteristics to the PSV rollers series.
The spiral cage, in permanent contact with the dirty side of the belt, removes material from the belt using its natural rotary cleaning action.
The rollers should be installed in a way that the spiral moves the material towards the edge of the belt.
These rollers must not be employed as belt snub rollers.
On customer request cleaning rollers may be supplied with spirals in steel, with non standard dimensions
and characteristics (for example steel spiral in flattened format).